Ableton live 7 warp free.Loop: Five Perspectives on Working with Environmental Noise
Looking for:
Compare Live editions | Ableton - Ableton Reference Manual |
Audio Clips, Tempo, and Warping — Ableton Reference Manual Version 11 | Ableton
The functionality of the Oxygen Pro control surface script has been drastically changed. Updated the bundled Max build to version 8. For a complete Max 8. Interface Improvements. Midi Recording and Editing.
Improved Live's history for Automation Mode. It is now possible to edit the value of a time selection in an automation lane with no events. When right-clicking near the dotted line inside the selection, the "Edit Value" context menu command allows entering a value for the selected segment. In automation lanes, the Automation Transform handles now snap at the top and bottom positions, and at the opposite top and bottom corner positions. Snapping is indicated by a less transparent frame color.
Control Surfaces. Multi Clip Editing. New Devices and Device Improvements. Mousewheel zoom events now can resize all the highlighted content tracks in the Arrangement View. Previously, this exclusively worked for tracks whose headers where selected.
Live 10 Release Notes Specifically: The Rewind and Fastforward buttons will now rewind and fastforward the Arrangement position. Turning the Encoder will now scroll the Session frame up and down. Holding the Encoder down and turning it will scroll the selected Scene up and down. Fixed an issue where the Session frame was visible even when the hardware was not connected.
The faders now always control volume. The Faderport 16 still requires manual setup, but Faderport 16 and 16 XT will appear in the control surface dropdown menu. On Windows, pressing "Alt" in Live now shows Menu Accelerator Keys to open menu bar items, as is the behavior in standard Windows applications.
On Windows, Live once again detects if it could not create a directory because one already existed. Alternatively, if grouped prior to setting the MIDI routing between the two, Live would also crash when attempting to ungroup the pair once the routing was set.
Grouping and ungrouping within the device chain will now behave as expected. Full Screen mode is still available using the "F11" key. Previously, under certain circumstances, Live appeared to hang because the UI could not be drawn. Previously, installing many Live Packs at once caused Live's installation dialog window to become too big and unable to be used properly. Fixed an issue where the Track Solo feature of the Tranzport control surface script did not work correctly.
Live will show and use. Fixed a crash that could occur during video export when using an external display as the primary display on MacBook Pro macOS. Live is compatible with Apple Silicon computers running Rosetta. With the Launchkey MK3 control surface script, it is now possible to continue playback by holding down the Shift button and pressing the Play button.
Previously, a visual glitch could appear around the Groove Pool selector button, under certain circumstances. Fixed an issue where a pending auto-update would sometimes not be applied after downloading. Note: this fix only affects auto-updates to future versions of Live. Previously, the Operator device could crash or calculate inaccurate frequencies when its Fixed Mode and Spread parameters were enabled.
Live's window no longer turns red when loading a Set with missing plug-in devices. Previously, Live would hang when turning its audio engine off, under certain circumstances. Fixed a bug that prevented certain low-resolution plug-in devices from scaling correctly on macOS. Fixed a crash that could occur when cancelling an "Export Audio" operation during the "Wait for silence" step. Fixed a crash that could occur when running certain plug-in devices. When the Vestax VCM is detected by Live, its control surface script will now be automatically selected and set up.
Shift-key functionality once again works as expected in the Clip View's Sample Display. Previously, Packs would change icons upon being assigned a color in the browser. The Max device error view description text now follows Live's selected theme. Fixed some bugs: - Certain VST3 plug-ins that are not defined as instruments e.
Previously, cropping an unwarped clip could produce a clip whose loop markers were outside the sample. When saving a Set for the first time, self-containing the Set or creating a Pack using Live's File Manager, Live would incorrectly enable the Warp switch for such clips. Fixed a crash that could occur when using certain VST3 plug-ins. Previously, when cropping an unlooped MIDI clip whose loop was outside the audible region, Live would hang when enabling the cropped clip's loop.
A memory leak and subsequent crash on macOS has been fixed when Live's window is not being interacted with for a prolonged period of time. Every Push 2 user will get a firmware update to v. This firmware version fixes an issue that caused some displays to appear upside down. Metal support is disabled on OS X Added more Live theme colors to Max for Live.
When the Pedal device is disabled, the Pedal Type chooser switch now appears in the correct text color. When the Glue Compressor device is disabled, the text labels around rotary switches now stay in the same place.
Updated various info texts, and improved some info text translations for Spanish and French languages. Bugfixes: Fixed hanging that could occur when dragging a compressed sample into Live, under certain circumstances macOS only.
Previously, an erroneous message would appear in the Status Bar when deleting an audio file within a folder in the Places section of the browser. Fixed lagging that occurred in the browser's search field when the Sounds label was selected. Previously, a Macro Control's range settings were not correctly updated when that Macro Control was being controlled by a Max for Live device. On first start, Live now only selects Simplified Chinese as the UI language if either: - the operating system language is set to Simplified Chinese; or - the operating system region is set to the People's Republic of China excluding Taiwan and special administrative regions such as Hong Kong and Macao.
On macOS, if the operating system language is set to Simplified Chinese, Live now asks for permissions e. Live could crash when closing a window, a drop-down menu, or a context menu, under certain circumstances. Pressing and releasing Clear will still delete the current clip.
In the Launchpad Pro MK3's Device Mode, the last selected parameter bank of each device instance will now be recalled upon reselecting the device instance. When Live is set to Japanese, the formatting of lesson texts in the Help View is once again displayed correctly.
Previously, Live would not respond to mouse clicks if a dialog opened while another application was in focus macOS only. Previously, newly-created clips sometimes did not inherit their track color. Devices In the Wavetable device, Undo commands performed on changes to user wavetables should now work as expected, and provide more meaningful undo descriptions for parameters that previously only displayed the default "Change Value" Undo action description.
Previously in the Echo and Delay devices, the first repeats of the audio signal were repitched, under certain circumstances. Fixed an issue that caused intermittent dropouts in the DS Kick device. Fixed a crash that occurred when loading Live Sets, under certain circumstances.
Fixed a bug that created unintended fade-ins, under certain circumstances. Fixed the display and editing of continuous parameters in VST3 plug-in devices. Where supported, VST3 plug-ins now use a linear knob mode. Previously, Live's Preferences were reset after updating to a new version, under certain conditions. It is no longer possible to change parameter values in a Max for Live device, if the track containing that device is frozen.
Info texts and Help View lessons now have Chinese translations. Recording automation for multiple device or mixer parameters together will now result in less steps to undo on Push. While recording on Push, pressing the Fixed Length button near the end of a segment of time that corresponds with the Global Quantization setting will cause Live to wait until that amount of time is elapsed before stopping the recording.
When Push is connected, other control surfaces will no longer conflict with the automatic track arming behavior of Push. When using multiple Push control surfaces, they will no longer conflict with each other's automatic track arming behavior.
In the Novation Launchpad Pro MK3 controller's Device Mode, the last selected parameter bank of each device instance will now be recalled upon reselecting the device instance. Max for Live Default Max for Live devices now use live. Fixed a bug that prevented undo and redo operations upon creating a computer keyboard mapping, as well as redo operations after deleting a computer keyboard mapping. Fixed a visual glitch that appeared when moving the mouse over an automation envelope.
Previously when dragging a velocity marker, the mouse cursor would jump back to its initial position. When using an encoder on a MIDI controller to control a device parameter with discrete values, the control functionality will no longer be inverted.
Devices Previously, when instantiating an Audio Unit plug-in, Live would sometimes display an error message about a folder that could not be created. Previously, after replacing a Max for Live device and then undoing the operation, the wrong device name would be displayed. Fixed a crash that occurred after unfreezing a track containing Wavetable, and then deleting the Wavetable device.
Parameter banks in the Wavetable device will now be correctly mapped to control surfaces. Fixed a crash that occurred when selecting and freezing multiple tracks containing the External Instrument device. If a track with a plug-in device is unfrozen, has its plug-in parameters or preset changed, and is frozen again, it will now record new audio instead of using the old frozen audio file. Max for Live devices that are not visible are now correctly notified of active state changes.
- Ableton live 7 warp free
Any sound professional will be able to know how to obtain what he needs from Ableton Live. Ableton Live allows you to create music of any genre. If you're focused on live gigs, all you need is Session, also known as Clips view. It's a non-linear mode in which you'll be able to record and play your ideas immediately in the order of your choice , a very flexible way to compose with absolute freedom and improvisation.
Do you want to transfer all that workflow to a traditional project based on a timeline? Press the record button and register all the activity in real-time thanks to the Arrangement view. It's the traditional way to work with audio sequencers, with the tracks divided vertically and the timeline to distribute the events. Unlinked clip envelopes are not affected. Unlike cropping audio clips see 8. The Deactivate Note s command will mute the note, making it appear gray in the display.
Press 0 again to reactivate notes. You can de- or reactivate all of the notes in a single key track at once by clicking a key on the piano roll and pressing 0. This helps you to see melodic and rhythmic relationships between different clips when creating and refining musical ideas, and allows you to edit material across separate tracks and scenes more quickly.
In addition to editing notes across multiple clips, you can also modify various parameters for the selected clips. Note that multi-clip editing works differently depending on whether you are working in the Session or Arrangement View.
These differences are explained in dedicated sections for the Session View see Focus Mode allows you to select a single clip to edit while viewing multiple clips. Focus Mode can be toggled via the Focus button or the N keyboard shortcut. Holding N while editing with the mouse toggles Focus Mode momentarily. Multi-clip editing functions differently depending on whether Focus Mode is enabled or not.
If multiple clips of different lengths are selected, the MIDI Note Editor will show as many loop iterations as necessary for the clips to realign. While multi-clip editing is useful for looking at clips across different tracks, it can also come in handy when you need to compare and edit multiple clips within the same track.
For example, you can create evolving pattern progressions by adding notes to a clip, then making a variation to the clip in the following scene and so on, while maintaining an overview of the other clips in the track. In the Arrangement View, it is possible to select and view MIDI clips from up to eight tracks, across a selection of time.
The MIDI Note Editor will not show silence before or after the selection of clips — instead, it will fit its display range to show the beginning of the first clip up to the end of the last clip in the selection. If the selection contains looped and unlooped clips, the Loop button will appear half colored.
To smoothly change the time-zoom level, click and drag vertically in the time ruler. Drag horizontally in the time ruler to scroll from left to right. Click and drag vertically in the note ruler to change which octaves are shown, or drag horizontally to change the vertical zoom size of MIDI notes and the keyboard.
Then, double-click on the note ruler or time ruler to automatically zoom in on your selection. If nothing is selected, double-clicking the note ruler will zoom in on the area from the lowest to the highest note in the clip, while double-clicking the time ruler will zoom out to show the time between the first and last note.
It always shows the complete contents of the selected MIDI clip. The black rectangular outline represents the part of the clip that is currently displayed in the Editor above. To scroll, click within the outline and drag left or right; to zoom in and out, drag up and down. Change the length of what is shown in the Editor by dragging the left or right edges of the outline in the Clip Overview. To quickly change what is shown in the Editor, click on a section that you want to examine in the Clip Overview, then drag downwards to zoom in, or scroll by dragging left and right.
Here is how selection works: Clicking a note selects the note. Esc deselects all selected notes. Clicking into the background of the MIDI Note Editor selects a point in time, represented by a flashing insert marker. Clicking and dragging in the background selects a timespan.
Press Enter to toggle the selection between the timespan and any notes that begin within it. After placing the insert marker, you can manipulate it using your computer keyboard. Press the left or right arrow keys to move the insert marker to the left or right, according to the grid settings. Hold down Shift while pressing the arrow keys to extend or retract the selected timespan by moving the insert marker. Several key modifiers also apply to note editing: To transpose selected notes by octave, hold down Shift while pressing the up or down arrow keys.
Shift plus the left or right arrow keys extends or retracts the duration of selected notes, according to the grid settings. You can also remove a single note from your selection by holding down Shift and clicking on it.
Toggle Hot-Swap Mode. Open the Preferences. Finer Resolution for Dragging. Return to Default. Type in Value. Go to Next Field Bar. Abort Value Entry. Confirm Value Entry. Load Selected Item from Browser. Preview Selected File. Shift - Enter. Search in Browser.
Jump to Search Results. Assign Color s to Selected Browser Item s. Continue Play from Stop Point. Shift - Space. Stop Playback at end of Selection. CTRL - Space. ALT - Space. Play Arrangement View Selection. Move Insert Marker to Beginning. Back to Arrangement. CMD - Shift - Z. Select All. Clips and Slots Across all Tracks. Time Across all Tracks. The Selected Part of the Envelope. Move Start Marker to Position. Shift -click. Move Loop By Loop Length. CTRL up and down arrow keys. CMD up and down arrow keys.
CTRL right and left arrow keys. CMD right and left arrow keys. Select Material in Loop. CMD - Shift - L. Copy Clips. File Handling Fixed a bug where Live would incorrectly use a previous freeze sample instead of producing a new freeze sample after changing a device parameter. Fixed a bug which prevented AU presets from recalling parameters correctly.
Fixed a crash that might occur when trying to recover from a crash. Fixed a crash that occurred when closing Live while listed samples were selected in the File Manager. Interface Improvements Live could crash when displaying a modal plug-in dialog. Previously when clicking the drop area of the Arrangement, the track highlight would either move back to where the time selection was last, or not move at all. On Windows 10 with HiDPI enabled, the menu bar now works as expected if the main and second window are on screens with differing pixel densities.
Waveform drawing would not work properly at certain zoom levels. On Windows, Live no longer crashes if the file dialog is shown for a long time. Live would freeze at startup when running on monitors with refresh rates above 60 Hz. Previously, "Show Modulation" would appear in the context menu of an Envelope Editor, if a Max for Live parameter with no modulation was selected in the Clip Envelope Control chooser. In German, the text of the Export and Cancel buttons no longer overflows in the Render dialog.
In the browser, the search field now has the right text color in the Dark theme. In the Groove Pool, the drop message is no longer split onto two lines. In other places, text that appeared blurry in some buttons is now crisp again. On Windows, if you clicked a separator, the cursor would erroneously change back to a pointing cursor. On Windows, if using a screen with a refresh rate above 60 Hz, Live's UI would not draw smoothly and potentially lock up when loading certain plug-ins.
Under certain circumstances, a Live Set could become corrupt due to an invalid Group Track structure. On Windows, Live could crash while launching in cases where it failed to position itself on the screen. The playhead was no longer shown in the browser's Preview Tab.
Added further improvements to the UI performance on Windows in cases where Live runs on monitors with a high refresh rate. Max for Live Live could crash when loading a Set, if a Max for Live device was mapped to a macro control. Frequency, Gain and Q are automated or modulated. Adjusting Wavetable's envelope slopes could cause the audio engine to become silent under certain conditions.
Live could crash when duplicating a track containing a Wavetable instance. Setup Fixed a bug which affected the way invalid denominator values in time signature changes were corrected once the "Enter" key was pressed.
Previously, tracks created in Map Mode were not mappable. Live would not support ASIO interfaces with a single mono input channel. Update various info text translations. Changes for Push It is now possible to fine-tune Wavetable oscillators on Push 1. Improved the performance of Push 2's display process. With some graphics cards running on Windows, the Push 2 display process might frequently run into crashes with certain GPUs.
The copied automation will always land in the correct lane. Automation When nudging a time selection in an automation lane, the automation outside the selection remains unchanged. Enabled vertical auto-scrolling when dragging an automation lane.
Additional automation lanes are now unfolded by default. Improved the horizontal movement of a range of automation segments. Ramps are no longer created when a time selected range of automation is moved by nudging or dragging horizontally and is still partially within the original time range.
Fades no longer snap to the Arrangement View grid. When connected, the Novation Launchpad S and Launchpad Mini control surfaces are now automatically selected in the Preferences. Interface Improvements Improved Live's perfomance when resizing audio clips in the Arrangement. Added a gap between the handle and the track of the scrollbar in the Arrangement and Session View.
Sharpened the appearance of the triangle that appears above bipolar knobs. Adjusted spacing between devices and meters in device chains. Adjusted the color of the Arrangement Overview frame to increase visibility in dark Themes. Changed the color of Drum Rack label to increase visibility in the Dark Theme. Adjusted the spacing below Session View's horizontal scrollbar so that it is centered.
Adjusted the selection frame in device groups and corrected inconsistencies in the look and behaviour of the Sampler device. A track created by dropping a single clip into the Session or Arrangement View's Drop Area now inherits the clip color instead of the source track color. When dropping several clips at the same time, the new track still inherits the source track color, as before. Improved the playhead smoothness on Windows.
Fixed permissions issues on macOS for non-Admin accounts. Updated documentation for the Live Object Model. Multi-core rendering in Live is now supported if a Set contains Max for Live devices. Previously, there was a possibility that all MIDI notes in a key could disappear when stretched to an extremely small size e. This has now changed, and further stretching is not possible once notes reach a very small size. New Devices and Device Improvements Filter curve visualisations in Wavetable are updated in real time in cases where e.
Setup On Windows, Live now cleanly shuts down when a user logs out, shuts the computer down or reboots it. It also displays a message explaining why it is preventing the computer shutting down, giving the user 30 seconds to abort shutting down and save the Set. Updated various info texts. Wavetable In Wavetable's Mod Matrix, the left column containing target names now features bars that indicate the unmodulated and modulated value of the respective parameter.
Additive modulation is indicated by a bipolar bar starting from the unmodulated value, while multiplicative modulation is indicated by a unipolar bar starting from the left. When Live's transport is started or if there is a jump in beat time, Echo and Wavetable LFOs now update their phase if they are beat-synced.
Previously, start and end markers for unwarped audio clips were erroneously quantized to the grid. Creating a warp marker could trigger scrolling of the selected clip under certain circumstances. Previously it was not possible to adjust the loop start position in unwarped audio clips without quantization. A crash would occur when editing the crossfade between two very short clips.
Fixed a crash when removing a device that showed a parameter in an additional automation lane while the mouse is hovering over the parameter's automation. The "Select Track Content" context menu command would not work on multiple selected tracks.
Automation Previously, when copying an Arrangement clip with existing automation to another track, automation would not be copied even if the target track and source track contained identical devices. Also, if a track is created by dragging a clip into the Arrangement drop area, all automation is now copied over and set to the the correct time.
Copying and pasting automation might lead to unexpected results, if the copied selection extended across multiple tracks. When pressing the Option Alt key and clicking on a track's Unfold Track button, the position of that track does not change. Live could crash on Windows when clicking on a breakpoint while holding the grid modifier. Positioning fade handles with arrow keys was not working correctly. Browser AU plug-in default presets. Files from the "Current Project" label might fail to appear in the browser under certain circumstances.
File types unsupported in certain editions and when run as a ReWire slave e. M4A audio files would not show up in Live's browser anymore. Control Surfaces Added bank definitions to Wavetable for third-party control surfaces. File Handling Previously it was not possible to delete files or directories with names containing slashes.
Previously, toggling Automation Mode would create an Undo step. Plug-ins and Sets that are saved in directory junctions on Windows work again. Live would crash when launching the program by double-clicking a Live Set, in cases where the Live Set was corrupted. Fixed a problem which might prevent AU presets from recalling correctly. Live's window contents no longer briefly flicker after changes to a hardware display setup.
Depending on the language used in Live, the progress of the crash recovery wasn't visible on the splash screen because the text was clipped. Improved the drag and drop handling on HiDPI screens. Previously, dragging a file from Explorer into Live would show the file at the wrong position in Live Windows only. Fixed a bug which caused text to overflow on top of the frame containing the browser's search field. Fixed a bug which caused clips to be incorrectly colored when readded to a Live Set, if an.
Fixed a bug where sequences of visually short borderless notes would be nearly invisible if crowded into overlapping pixel areas. Fixed a minor visual issue affecting corners in grouped devices. Fixed a minor inconsistency in the height of notes in Arrangement clips and clip previews.
Upon loading a Live Set, the clip envelope parameter selection would not be restored in the Detail View. When double-clicking and dragging a slider control, the mouse cursor would not be hidden as expected, if Pen Tablet Mode was disabled.
Meters in Live's mixer would appear as stuck when loading a Set. Improved UI performance on Windows when resizing Arrangement clips. Fixed a bug which incorrectly applied bold formatting to chunks of text in the Help View. If HiDPI was enabled on a Windows 10 machine, the preview of a dragged object either dragged within Live or into Live would appear offset.
If multiple audio clips were selected, changing a selection in the Detail View would create a wrong time selection in the Arrangement. Removed inconsistent extra spacing from the context menu entry "Add Lane for Each Automated Envelope" in automation lane headers. Previously, some radio buttons in certain devices displayed unreadable text. On Windows, dropping files from Addictive Drums 2 into Live works again. When renaming Arrangement clips, the wrong mouse cursor would be displayed, making it difficult to insert the cursor at the desired position.
The grayed out text "Open Groove Pool On Windows, if a plug-in showed a modal dialog, the main window could not be closed while that dialog was being shown. Horizontal sliders are now black instead of white in the Dark Theme this is particularly noticeable for plug-in device parameters in the Detail View. Restored Hints functionality.
Live could crash when deleting a Max for Live device which had a fullscreen window. Live's main window can no longer obscure all other windows when using Max for Live devices. The Max patcher window is now correctly sized on Windows. Text in message boxes would sometimes appear cut off. Various nodesnames attribute improvements.
Fixed issues with adding new objects to presentation mode. Seq object now properly records MIDI. Firewall permissions dialog is appropriately suppressed in the Max for Live editor.
HiDPI: improved drawing when changing Windows display settings. Max Authorization Window: improved wording and user options. Performing an Undo after Macro-mapping a Max parameter would leave that parameter unmapped and unusable. Live would crash when dragging a Live device on top of a Max for Live device. Mapping Device Rack Macros to a live.
MIDI editor When folding an empty MIDI clip in a Drum Rack that contained at least one chain receiving all notes, the clip would fold to that chain only, whereas now the clip will not fold at all.
Also, when switching between audio clips while a warp marker was selected, the Seg. BPM box would erroneously show the tempo of the previously selected marker. This would also lead to jumps in the displayed waveform visualization when the tempo was adjusted.
In a multi-clip editing scenario, notes of all clips are taken into account, whereas previously only the notes of the foreground clip were considered. Additionally, fixed a bug which prevented the vertical zoom state from initializing correctly under certain circumstances. Fixed a few minor bugs in the MIDI Editor: when selecting one out of many selected notes, the selection would not revert to the selected note when opening the context menu while hovering over a background note, and then clicking outside of the context menu, the background note would remain in a hovered state when hovering over a background note, it was possible to highlight a momentarily invisible foreground note Multi Clip Editing Previously, the adaptive grid size of a newly created clip could sometimes be incorrectly calculated when multi-clip editing.
Navigation Tracks in the Arrangement View would scroll out of view completely when toggling Automation Mode if the highlighted track was not visible. When resizing an Arrangement track, only tracks whose header is selected will be resized. Previously, a track might be erroneously resized if a content selection existed on that track.
When scrolling up and down in the Arrangement View using a mousewheel, the view would only move in very small increments. Previously, when extracting a Drum Rack chain to a new track, the zoom level and time selection were erroneously applied to the newly created clip. When undoing the deletion of a note while in Arrangement View, the Clip View zoom level unexpectedly zoomed in to that note. Previously, scrolling the Arrangement's mixer section with a mousewheel was not possible. Previously, the time selection status display would not get updated when selecting a clip in the Arrangement.
The grid modifier would not toggle the grid when changing the time selection or moving the insert marker with the arrow keys. Dragging a device over a Session return track header that overlapped a group device chain header would cause erratic scrolling in Session View.
Nested Groups Fixed a crash that occurred when duplicating a nested Group Track containing a plug-in with an active modal dialog while Live's second window was open. New Devices and Device Improvements The Arpeggiator device could lead to crashes under certain circumstances. AU plug-in parameters might behave erratically when being controlled with the mouse, under certain circumstances.
It was erroneously possible to tweak parameters in the expanded view of certain devices, even if the track was frozen. Under certain circumstances, some Wavetable and Echo parameters would not respond smoothly. Simpler's settings would not be recalled correctly, if the device was set to Slice by Beat and its playback was not warped. Echo's timing would change when exporting audio at a different sample rate than the one currently in use.
Under certain circumstances, Wavetable's polyphonic voice stealing would cause certain notes to get stuck. A crash might occur when trying to preview a Live Clip in Live's browser, if this referenced a Wavetable device. The switches on the left side of the Glue Compressor device are now centered. Certain parameter names would be truncated in the left column of Wavetable's Modulation Matrix. Dropping many samples onto a Simpler or a Drum Rack would take much longer in Live 10 than it did in Live 9.
Live could crash when loading certain Wavetable presets from the Core Library. Setup Fixed a bug which caused a "Preferences. Fixed a crash which occurred on startup under certain circumstances. On certain Windows machines, attempting to authorize Live 10 would fail. Live was not able to prevent entering Sleep mode or turning off the display on Windows. Wavetable The animated sliders beneath the modulation target names would occasionally not appear in Wavetable.
Improved Wavetable's impact on CPU under certain circumstances. Changes for Push: Push Improved the display of Live's color palette on third-party control surfaces. Updated Push 2's firmware to version 1. This version contains the updated color palette for Live Envelope visualizations are now available for Wavetable on Push 2. It is now possible to select wavetables in the Wavetable device on Push 1.
Push bugfixes: Push The clip color palette for Push 1 was updated to match the Live 10 color palette. The Push 1 browser would not display entries correctly if Live's language was set to Japanese. Fixed parameter sensitivities for Analog and Impulse devices on Push 2. Push Device Visualization Wavetable's filter visualization on Push 2 might be displayed incorrectly after the Control Surface script was reinitialized. A device's color would not update correctly on Push 2 when moving the device to a new track.
Push 2's display failed to indicate that an automation existed for certain Wavetable filter parameters. Fixed envelope slope visualizations in Wavetable on Push 2. Added missing parameters and icons for Operator and Analog's parameter banks on Push 2. Fixed a scenario where Push 2's display could crash when hot-swapping AU plug-in presets.
The Note Settings view would close after touching an encoder, if all notes were being edited Push 1 and Push 2. It is now possible to copy, paste, duplicate and nudge a time selection that spans across automation lanes in multiple tracks. When an Arrangement selection resides on an automation lane, the text for nudging changes from "Nudge Clip s " to "Nudge Envelope s ". While dragging MIDI clips, notes are drawn in the range of the target track.
This enables seeing the content of the clips in the context of the target track. Automation It is now possible to extend a selection from an automation lane to the content lane of the same track. Introduced a "micro-snapping" behavior: clips, loop markers and warp markers snap to a grid line even if the grid is off, if the distance to that grid line does not exceed 1 pixel. Browser It is now possible to add Factory Packs content to Collections.
Capture Capture can now change the Set tempo, if a preferable interpretation is found. When overdubbing a loop in the Session View, Capture will choose the loop iteration with a significant amount of new material in it. This is achieved via a context menu by right-clicking on the plug-in device either in the browser or in the Detail View.
If the setting is disabled, the plug-in will appear much smaller in size, but this helps in cases where the mouse would behave erratically when trying to interact with the plug-in UI. Improved the zoom cursor design to increase its visibility with all Themes. When dropping a sample on a Drum Rack pad, its border now appears in black or white instead of orange , depending on the Theme in use.
Improved the 'Live 9' Theme. When editing multiple clips while zoomed out of the MIDI Editor, notes are now displayed in a shaded version of their clip color, so it is easier to identify to which clip they belong to. The color of the little ticks that indicate a boundary between two very small notes has also been adjusted to improve readability. Finally, in order to make high-precision note editing easier, notes are no longer displayed as selected when they are being controlled by the mouse e.
Level meter ticks now match the color of the dB labels beside them. Changed the width of tracks created by dragging and dropping something into Live. Updated the Mid-Dark and Dark Themes. Added minor color changes to Automation Mode. The Solo buttons have been updated to fit the new font.
Improved the appearance of the Solo button icons. Minor improvements to the title bar of the multi-clip editor. Updated Ableton Sans Font: enabled use of additional diacritical marks, and correctly positioned them at the height of lower-case characters. Increased the opacity of the clip content in Automation Mode. Live support exchanging SysEx messages with Max. Mixing The number of audio-in buses for plug-ins has been increased to a total of eight inputs.
Multi Clip Editing Improved the behavior of the Fold button when editing multiple clips at the same time. Scrubbing in MIDI Clips now works when multi-clip editing: - Scrubbing in the Session View will play the clips as if they had been started at the same time, i. If the current selection contains several clips from the same track, clips will be chosen from each track in the following order: foreground clip, playing clip, triggered clip, first clip of the track.
Scrubbing is currently disabled if one of the clips is frozen. Note: the trigger line that shows where the clip s would start during the trigger state does not yet support multiple clips.
This will be addressed in the future. Additional bugfixes: - Previously, the freeze layer on top of the scrub area was not shown for frozen MIDI clips. Improved the behavior of the Fold button when editing multiple clips at the same time. Navigation Audio tracks will be automatically named by the clips that are added onto them.
If there is a single session or arrangement clip in a track, then the name of the track will follow the name of that clip. If more clips are added, the track will stick with whatever name it got when there was only one clip. If all clips are removed from the track, the track will return to its default name.
Refined zooming behavior in the Arrangement, to avoid scenarios where the view would jump to the middle of a selection if only one edge of the selection was currently visible. Follow is now paused while breakpoints are created. Additionally, when replacing a sample already loaded into Simpler, the new sample will retain all the Warp and Loop settings. Added performance improvements to Wavetable and Echo. Real-time modulation signals are now visible at the top of Wavetable's Modulation Matrix.
Reduced the memory footprint of Wavetable. Also reduced occurrences of clicks in the audio when stealing voices.
Macro-mapped controls in Wavetable now appear in the Modulation Matrix. Improved Wavetable's LFO display to make the visualization smoother and more consistent. Wavetable's Modulation Matrix headers are now clickable, allowing to jump to the respective modulation source panel.
This reduces energy use and heat, and improves battery life. Copying an Arrangement clip in Session View could create additional unwanted Session clips, under certain circumstances. Live would crash when loading a Live Set, if one of the tracks contained very short clips, and at least one clip was set to "Master" tempo in the Arrangement. The Segment BPM box is now only editable when a single warp marker is selected.
Also, when an audio clip's Warp switch is activated, or when an audio clip is selected, the first warp marker is now selected and the box is consequently editable. Nudging selected material in the Arrangement might lead to unexpected results, when entering or exiting Automation Mode after creating a selection. When deleting part of a clip within a fade-in, the fade-in no longer spans the empty space.
Fixed a crash that occurred when copying a time selection on a track containing Send automation, under certain circumstances. Nudging clips in the Arrangement was not possible when the time selection was made by dragging from right to left. When nudging a selection on an automation lane, the automation would be copied instead than moved. When dragging transient markers with the Shift modifier pressed, the transient markers would be deleted instead of moved.
Live would crash when moving at least three clips under certain circumstances. Bugfixes for time selection in Detail View for MIDI clips: when clicking the time selection header with an expanded time selection, the time selection would be lost. Fixed a bug which prevented nudging Arrangement clips correctly, under certain conditions.
Additionally, undoing the deletion of a clip could prevent the time selection from being restored. Live could crash when copying a frozen clip from Arrangement View to Session View.
Additionally, it is now possible to drag frozen clips from Arrangement View to Session View.
Comments
Post a Comment